Making A Hatoto Cloth Bag

The bag pattern I used for my bag was the Hatoto Bag pattern from Yoshimi The Flying Squirrel. Here are my efforts, the fabric I used was a curtain fabric for the outside, and a patterned cotton for the inside (All from my stash). I haven't given any instructions as there were none with a the PDF that I could see. Though if you have made bags before this will be easy....not much can go wrong.

Getting ready to cut out....

Cutting a square for making the
 bottom of the bag

Making a strap to hang keys off...

Sewing the outside of the bag....This
fabric frays so easily 

Sewing the lining to the fabric top inside
bag....

Lining all ready to insert..and turn.

Quality control checking the seams...

Inside the bag the key strap ison the left..
I have a wee orange bag hanging off it.

All finished... not the best pic wrong time of day!
It's a very handy sized bag...thanks Yoshimi.

Making a Book Bag

I'm making a book bag for school library books. This time I'm using oil cloth because it is waterproof....The blue one I didn't measure at all, I just made it into a size I thought would be okay. All the library books fit nicely into the book bag. It also fits into the school bag just fine.....So I have used the same sizing to make the pink one......

Materials I used: Oil Cloth, Bias Binding, Glue,Velcro, Bulldog Clip, Cotton

Size: 15"length, 13" across, add extra 6 1/2"s for the flap

Sewing Machine: Bernina Activa 220

Sewing Foot:  Ordinary straight sewing foot

Tip:  Use small pegs or bulldog clips to hold the oil cloth as it is slippery when sewing. Also try and match your cotton to the Velcro your using, then you don't see any wonky Velcro stitches.

The first bag I made, the fabric is oil cloth...

Measure up your bag, you can make a pattern or

just measure and mark straight onto the fabric.

Cut out the size you want, remembering to add

extra for the fold over flap. Then fold to the

 size you have decided to make

I'm using a plate to make the rounded edges,

trace round with a pen or marker of choice...

Cut around the marked edge with scissors

I'm just checking the size...I made the blue

bag without taking measurements...the pink

one is a fraction larger....

Flatten the folded edge with a plastic ruler

Sew binding across the top. To hold bag together

use bulldog clips...or pegs. I could only find one...

Better buy some more!

Then pin the binding to the side. Pin all the

way round over the flap and finishing at the

bottom of the right side. You don't need

to bind the bottom because it is folded.

I used pins and clips to hold the

oil cloth in place

Cut bias ends leaving enough bias
to turn under for finishing off

Sew the binding on with a straight stitch. I stop

stitching at the opening just before the flap.
Then I flip the bag over so I can start stitching
 again on the right side of the fold down bias.
 Keeps it all nice and tidy....you don't want
 bobbin tangles on the front of the bag

Fold the end under what ever way you like.

This is not a very good job as I can see the

 folds underneath. Oil cloth fabric is slippery

 so it's easy for the binding to move.

I needed more bulldog clips!

Cut Velcro for closures. I made it hard for myself
by doing this process at the end when the bag
was finished. Best this is sewn on in the
beginning before you sew the bias on it
 makes it easier

Because I didn't think I could sew the Velcro on
 I glued it. But not one to give up easily I did
manage to sew it on in the end....not an easy
                  task.  It's much better to do it at the
  beginning

To hide the stitches on the front I sewed a piece
 of bias to the front

All finished and ready to use...